10-point locking steel security door

Stainless steel lever handle set

1* kitemark equivalent anti-drill Euro profile 80mm cylinder 

Pre-fitted high-security multi-point mortice lock

Stainless steel hinges – The door is supplied with the door pre-hung in the frame.

12 plastic caps for covering the fixing holes

6m of adhesive weather seal

Kirncroft 10-Point locking steel security doors are supplied with five keys as standard.

Approximately 85kg

Kirncroft security doors are pre-hung in the frame with the stainless steel threshold pre-welded.  This allows you to simply take the door out of the packaging and fit it straight into the aperture.

Our door sets are supplied in a RAL 7003 grey primer finish.

The size shown are the overall measurements including the frame.

Please see our 10-point locking steel fire-rated security doors.

If not welding a Kirncroft security door into a steel subframe, please follow the guidelines below:

Fitting into brickwork:
M8 x 50mm coach screw with 10mm rawl plugs.

Fitting into blockwork:
M8 x 50mm Coach screws with 10mm rawl plugs or M10 x 50 coach screws with 12mm rawl plugs.

Fitting into a timber frame:
M8 x 50mm coach screws or M10 x 50mm coach screws (no need for rawl plugs).

Fitting into lightweight steel frame:
No.14 (6.3mm) X 50mm self-drilling flanged hexagon tek bolts with a washer if required.

Fitting into a heavy-duty frame (such as support beams or steel angles):
M10 x 50 hex bolt sets.

(Please note that the length of the bolts and screws should be taken as a general guide and may not be suitable for every situation).

Please see the video here.